Ako neko ima vremena neka pogleda ovaj kod za citanje SN HDD... Na nekim racunarima kod radi dobro, dok na nekim funkcija vraca samo prazan string...Prvo sam mislio da ne radi na XP sa SP2, ali na jednom radi na drugom ne radi...da li neko mozda zna u cemu je caka...?
Pozdrav!
procedure TForm1.Button1Click(Sender: TObject);
var
s:String;
begin
s:= GetIdeDiskSerialNumber;
ShowMessage('HDDSerial: ' + s);
end;
///////////////////////////////////////////////////////////////////////////////
function TForm1.GetIdeDiskSerialNumber: String;
type
TSrbIoControl = packed record
HeaderLength : ULONG;
Signature : Array[0..7] of Char;
Timeout : ULONG;
ControlCode : ULONG;
ReturnCode : ULONG;
Length : ULONG;
end;
SRB_IO_CONTROL = TSrbIoControl;
PSrbIoControl = ^TSrbIoControl;
TIDERegs = packed record
bFeaturesReg : Byte; // Used for specifying SMART "commands".
bSectorCountReg : Byte; // IDE sector count register
bSectorNumberReg : Byte; // IDE sector number register
bCylLowReg : Byte; // IDE low order cylinder value
bCylHighReg : Byte; // IDE high order cylinder value
bDriveHeadReg : Byte; // IDE drive/head register
bCommandReg : Byte; // Actual IDE command.
bReserved : Byte; // reserved. Must be zero.
end;
IDEREGS = TIDERegs;
PIDERegs = ^TIDERegs;
TSendCmdInParams = packed record
cBufferSize : DWORD;
irDriveRegs : TIDERegs;
bDriveNumber : Byte;
bReserved : Array[0..2] of Byte;
dwReserved : Array[0..3] of DWORD;
bBuffer : Array[0..0] of Byte;
end;
SENDCMDINPARAMS = TSendCmdInParams;
PSendCmdInParams = ^TSendCmdInParams;
TIdSector = packed record
wGenConfig : Word;
wNumCyls : Word;
wReserved : Word;
wNumHeads : Word;
wBytesPerTrack : Word;
wBytesPerSector : Word;
wSectorsPerTrack : Word;
wVendorUnique : Array[0..2] of Word;
sSerialNumber : Array[0..19] of Char;
wBufferType : Word;
wBufferSize : Word;
wECCSize : Word;
sFirmwareRev : Array[0..7] of Char;
sModelNumber : Array[0..39] of Char;
wMoreVendorUnique : Word;
wDoubleWordIO : Word;
wCapabilities : Word;
wReserved1 : Word;
wPIOTiming : Word;
wDMATiming : Word;
wBS : Word;
wNumCurrentCyls : Word;
wNumCurrentHeads : Word;
wNumCurrentSectorsPerTrack : Word;
ulCurrentSectorCapacity : ULONG;
wMultSectorStuff : Word;
ulTotalAddressableSectors : ULONG;
wSingleWordDMA : Word;
wMultiWordDMA : Word;
bReserved : Array[0..127] of Byte;
end;
PIdSector = ^TIdSector;
const
IDE_ID_FUNCTION = $EC;
IDENTIFY_BUFFER_SIZE = 512;
DFP_RECEIVE_DRIVE_DATA = $0007c088;
IOCTL_SCSI_MINIPORT = $0004d008;
IOCTL_SCSI_MINIPORT_IDENTIFY = $001b0501;
DataSize = sizeof(TSendCmdInParams)-1+IDENTIFY_BUFFER_SIZE;
BufferSize = SizeOf(SRB_IO_CONTROL)+DataSize;
W9xBufferSize = IDENTIFY_BUFFER_SIZE+16;
var
hDevice : THandle;
cbBytesReturned : DWORD;
pInData : PSendCmdInParams;
pOutData : Pointer; // PSendCmdOutParams
Buffer : Array[0..BufferSize-1] of Byte;
srbControl : TSrbIoControl absolute Buffer;
begin
Result := '';
FillChar(Buffer,BufferSize,#0);
if Win32Platform=VER_PLATFORM_WIN32_NT then
begin // Windows NT, Windows 2000, Windows XP
// Get SCSI port handle
hDevice := CreateFile('\\.\Scsi0:',
// Note: '\\.\C:' required administrative privileges.
GENERIC_READ or GENERIC_WRITE,
FILE_SHARE_READ or FILE_SHARE_WRITE,
nil, OPEN_EXISTING, 0, 0);
if hDevice=INVALID_HANDLE_VALUE then Exit;
try
srbControl.HeaderLength := SizeOf(SRB_IO_CONTROL);
System.Move('SCSIDISK',srbControl.Signature,8);
srbControl.Timeout := 2;
srbControl.Length := DataSize;
srbControl.ControlCode := IOCTL_SCSI_MINIPORT_IDENTIFY;
pInData := PSendCmdInParams(PChar(@Buffer)
+SizeOf(SRB_IO_CONTROL));
pOutData := pInData;
with pInData^ do begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
bDriveNumber := 0;
with irDriveRegs do begin
bFeaturesReg := 0;
bSectorCountReg := 1;
bSectorNumberReg := 1;
bCylLowReg := 0;
bCylHighReg := 0;
bDriveHeadReg := $A0;
bCommandReg := IDE_ID_FUNCTION;
end;
end;
if not DeviceIoControl( hDevice, IOCTL_SCSI_MINIPORT,
@Buffer, BufferSize, @Buffer, BufferSize,
cbBytesReturned, nil ) then Exit;
finally
CloseHandle(hDevice);
end;
end
else begin // Windows 95 OSR2, Windows 98, Windows ME
hDevice := CreateFile( '\\.\SMARTVSD', 0, 0, nil,CREATE_NEW, 0, 0 );
if hDevice=INVALID_HANDLE_VALUE then Exit;
try
pInData := PSendCmdInParams(@Buffer);
pOutData := @pInData^.bBuffer;
with pInData^ do begin
cBufferSize := IDENTIFY_BUFFER_SIZE;
bDriveNumber := 0;
with irDriveRegs do begin
bFeaturesReg := 0;
bSectorCountReg := 1;
bSectorNumberReg := 1;
bCylLowReg := 0;
bCylHighReg := 0;
bDriveHeadReg := $A0;
bCommandReg := IDE_ID_FUNCTION;
end;
end;
if not DeviceIoControl( hDevice, DFP_RECEIVE_DRIVE_DATA,pInData,
SizeOf(TSendCmdInParams)-1, pOutData,W9xBufferSize, cbBytesReturned, nil )
then Exit;
finally
CloseHandle(hDevice);
end;
end;
with PIdSector(PChar(pOutData)+16)^ do begin
ChangeByteOrder(sSerialNumber,SizeOf(sSerialNumber));
SetString(Result,sSerialNumber,SizeOf(sSerialNumber));
end;
end;
///////////////////////////////////////////////////////////////////////////////
procedure TForm1.ChangeByteOrder(var Data; Size: Integer);
var ptr : PChar;
i : Integer;
c : Char;
begin
ptr := @Data;
for i := 0 to (Size shr 1)-1 do
begin
c := ptr^;
ptr^ := (ptr+1)^;
(ptr+1)^ := c;
Inc(ptr,2);
end;
end;
end.